Milwaukee’s next uses for its M12 and M18 batteries range from freezing food on a job site to spreading fertilizer across a lawn. The five upcoming products follow this year’s announcements of a 3/4-inch high-torque impact wrench and an HD15 Ah battery. Milwaukee announced some of the five over the summer, but none was on sale as of November 20, 2026. How-To Geek reported that some of the yard equipment might not reach stores until early 2027; that timing is not confirmed.
Portable power, a rolling fridge and a clamp-on fan
The M18 350W Power Supply and Charger (2856-20) does more than turn a tool battery into a power source. Plugged into the wall, it can charge two M18 packs while topping up a phone over USB. It has two 120V AC outlets and a pair of USB-C ports, one rated at 100W with Power Delivery and the other at 15W. Away from an outlet, it draws on one or two M18 packs to supply up to 350W for lights, fans or small appliances. A second pack extends runtime, whether on a job or during a power cut.
Both the charger and the M18 30QT Rolling Fridge (0810-20) fit Milwaukee’s PACKOUT system. The fridge rolls on large all-terrain wheels and can carry stacked gear on top. Its 30-quart compartment doubles as a freezer: Milwaukee says it can cool to minus 4 degrees. Alongside battery power, the fridge accepts AC power from a wall outlet or DC power through a 12V adapter. Its rated runtime is up to 24 hours. Product photos suggest it takes two M18 packs, but How-To Geek could not confirm that configuration.
The second-generation M12 Brushless Mounting Fan (0825-20) offers three ways to secure it without setting it on a work surface. Its magnetic base attaches to metal, its two-inch clamp grips a workbench edge or a 2x4, and an opening in the handle lets it hang from a nail, rope or hook. The fan moves 400 cubic feet of air per minute at speeds of up to 17 mph.
Handheld and self-propelled options for spreading granules
Broadcast spreaders can distribute fertilizer and pre-emergent lawn treatments or scatter salt on a driveway before a storm. The M12 Broadcast Spreader (3330-21) replaces the crank on a conventional handheld spreader. With an M12 pack installed, the operator squeezes a trigger to scatter material such as insect-control granules. Ryobi has offered a powered handheld model for years.
For a large yard or several properties, the M18 Self-Propelled Broadcast Spreader (3030-21HD) addresses a different problem: pushing a loaded spreader while working its lever. Its brushless motor runs on the included M18 12.0 battery and offers three walking speeds: 2.5, 3 and 3.5 mph. The operator can set the pace and spread coverage to keep application even as the hopper empties.
Milwaukee specifies a stainless-steel frame, a sealed gearbox and a protective battery cover for the self-propelled model. How-To Geek reported that the spreader could cost $1,200 or more, but that figure is an estimate, not a confirmed price.




Discussion